RF Exposure Measurements & Testing Cell Towers Part 1

Cell Towers, RF Exposure

http://www.emfnews.org/qlinks.html

Qlink Pendant

Home Radiation Protection

Envi Headsets

Gauss Meter

The popularity of cell phones and wireless communication devices has resulted in a proliferation of cell towers across the American landscape. Opposition to the placement of these towers has sometimes developed among segments of the population, usually based upon aesthetics, concern over the electromagnetic radiation, or both. http://www.emfnews.org/store/home-cell-phone-and-mobile-tower-radiation-meters.html

EMF Services can conduct testing and site assessments for individuals, schools, businesses, or municipalities who wish to become aware of the RF levels at a location near cell phone or broadcast towers. The report that we provide will permit comparison of measured levels with FCC Maximum Permissible Exposures (MPEs), precautionary guidelines, and routine background levels for comparable environments. If new antennas or towers are planned for your location, our site survey can be used to establish a baseline RF level for later comparison (before and after testing). Follow-up readings are provided at substantially reduced cost compared to the initial survey.

The purpose of this testing is to empower you to make responsible, fact-based decisions about the RF environment surrounding your community, facility, home, or school. We use advanced equipment to perform the most accurate and comprehensive RF exposure assessments in the industry. All services are delivered by personnel with several years of experience in planning and directing the installation of radio communication facilities, using equipment with current factory calibration certificates. If exposure reduction measures are desired, recommendations will be included in the report. The greatest advantage of our surveys over that of other providers is the ability to address the issue of low-level, long-term, non-thermal exposures, and to articulate the scientific rationale for a precautionary exposure guideline.

EMF Services no longer performs standard RF compliance surveys. We provide only enhanced testing services that involve more detailed data collection, and a more extensive and broader coverage report, than a conventional compliance survey. Our surveys incorporate procedures and equipment to separately measure cellular power density, in addition to the composite power density (the combination of all RF signals present). We use top quality professional equipment, and extensive procedural safeguards, to ensure the highest degree of RF measurement accuracy.

The purpose of our testing services is not to provide a basis for contesting the siting of cell phone towers or to seek their removal once sited. This position is not the result of an alliance between EMF Services and the cellular service providers. They are not our clients. Rather, it represents an effort to avoid leading you down the path toward a disappointing result. The RF levels near a cell tower will not approach Maximum Permissible Exposures at ground level where people are present. Therefore, from a legal perspective, grounds for such an action do not exist. Further, a court of law is not the best venue for a challenge to the science on which existing standards are based. The likely result is disappointment and a wasted financial expenditure. The best reason for testing and measurement services is to understand the field levels that exist, and what can be done to reduce them.

Fremont California USA
Djibouti, Djibouti
Bhutan Thimphu
Seychelles, Victoria
El Monte, California
Ghana, Accra
City of Coffs Harbour Australia
Romania Bucharest
Uruguay, Montevideo
Luxembourg Luxembourg City

Click on any of the pictures below

to learn more

Anti-Radiation Air-tube Headset

EMF Harmonization Products

Leave a Reply

Your email address will not be published. Required fields are marked *