Cell Phone Frequencies

Mobile Phone Radiation, Cell Phone Frequencies


Qlink Pendant

Home Radiation Protection

Envi Headsets

Gauss Meter

Cell phone frequencies are the frequency ranges within the Ultra High Frequency (UHF) band that are designated for cell phone use. Bluetooth devices, wireless networks, and television signals also use this frequency band. Although cellular phone systems divide cities and geographic areas into smaller cells of coverage, it allows for a fair amount of frequency reuse across the network. This ultimlately permits significantly more cell phone users to talk simultaneously on a network.

How Are Cell Phone Networks Designed?
Typically, a cell phone service provider is assigned up to 832 frequencies to use in a medium to large city. The carrier then divides the city into sub-cells that are normally 10 square miles and are covered by a low power base station, which is located in order to cover the entire cell. When cell users make a phone call within a cell on the network, they are assigned a duplex channel which permits two people to talk and listen simultaneously. On analog cell networks, this limits the number of users who can talk simultaneously to 56. With digital broadcast signals, three times as many people can talk at the same time (2G through 4G) making significantly more channels available for each digital cell. When calls are made from a cell network to a land-line, the call is switched to the land-based phone system through the given carrier’s Mobile Telephone Switching Office (MTSO).

What Are Cell Phone Codes Used For?
There are several cell phone codes that are used for different reasons on a cellular network. The Electronic Serial Number (ESN) is programmed into the phone when it is first produced and consists of a 32-bit number. The System Identification Code (SID) is FCC assigned, and is a unique five digit number. The Mobile Identification Number (MIN) is a 10-digit number that is derived from the cellular phone number. The MIN and SID numbers are set in the phone when a cellular carrier activates the phone and service plan. When a phone is first turned on, it searches for SIDs in range of one of the control channel frequencies and will transmit a registration request for the network once a SID is found. The phone will default to connecting to SIDs associated with the phone’s calling plan before connecting to one of another company. Once your phone registers with the network, the MTSO stores the cell location of your phone so that it can assign frequencies/channels and route calls to and from your phone. http://www.tech-faq.com/cell-phone-frequencies.html

What Are the GSM Cellular Fequency Bands?
The GSM mobile phone standard is implemented world-wide. There are a total of 14 GSM fequency bands that contain both pre-set and dynamic channel allocations. The frequency ranges for each GSM Frequency band are different, with frequencies ranging from 380.2 to 1990 Mhz. 921 Mhz to 1710.1 Mhz fequencies are not assigned to GSM bands and are assigned to other tasks by the FCC. Each GSM frequency band also makes use of a separate uplink and downlink frequency range within each pre-designated band. The uplink and downlink ranges are distinguished from each other in order to help minimize potential interference.

The Hague, Netherlands
Brazil, Brasilia
Queanbeyan, Australia
Wanneroo, Victoria
Lesotho, Maseru
Swan Hill, Victoria
El Salvador, San Salvador
Czech Republic, Prague
Subiaco, Victoria
Sharjah, United Arab Emirates, Sharjah, UAE

Click on any of the pictures below

to learn more


Anti-Radiation Air-tube Headset

EMF Harmonization Products


Microwave Radiation: How Far Does Cell Phone Radiation Travel From The Phone?

Mobile Phone Radiation, Microwave Radiation


Lifebluetube Headset

Cell Phone Radiation Protection

Mobile Phone Radiation Protection

Trifield Electromagnetic Field Meter


First, let me state that I’m aware of the dubious veracity of the subject, and that’s it’s neither been proven nor repudiated that cell phones generate adequate radiation to cause any cell damage at all. That said, better safe than sorry, I think, which is my motivation for this question. How far a distance can the radiation travel from the cell phone?

If I were to enable the speaker on my cell phone and hold the phone approximately one to two feet from my head while speaking, would any radiation still reach me…enough to actually have any affect at all, that is? Or would this put me at even more harm, as I’d be holding it off in front of my face, and thereby possibly exposing my eyes?
When holding a cell phone to your ear, how long would you have to be engaged in a conversation for ample radiation to cause any heating in the cells? Would mere minutes suffice, or would it take at least an hour?

Simple. Let’s apply a little deduction, shall we?
We know a phone emits radiation. We know how much and how far.
We do not know how this radiation effects the human body.

Qatar, Doha,
Yemen, Sana
Cameroon, Yaounde
Sweden, Stockholm
Orange, Australia
Clearwater Florida USA,
The Hague, Netherlands,
Visalia, California
Switzerland, Bern
Dubai, United Arab Emirates, Dubai, UAE

Click on any of the pictures below

to learn more


Anti-Radiation Air-tube Headset

EMF Harmonization Products